Subject	A few more pics.
Posted by	DVDBURN (MD) on July 01, 2008 at 11:21 PM
	This message has been viewed 461 times.
In Reply To	Terminated! posted by DVDBURN (MD) on July 01, 2008 at 09:57 PM
Message	I'll post the afters when I get things cleaned up. Here are some of the things that were done. I completely removed all previously installed wiring to include all the wiring for the NOS system and rewired and rerouted everything with new wire, new relays to a set of my own custom NOS controls in the glovebox. Rewired and relocated the boost controller. Repaired all wires which were previously spliced in to. Everything soldered with electrical tape only used in some cases to doubled up for heat shrink. Also doubled up heatshrink where needed. I installed a new instrument cluster with new custom gauge faces which I designed to perfectly match and overlay the OEM gauges, installed new carbon fiber (sorry, I like CF) from a rare new CF set from woodtrim to replace the pieces which used to have switches, moved all NOS controls to the glovebox in a custom mounted configuration with a new electrical design and reconfigured the gauges and controls in the glovebox. Rewired door and window controls to new Matrix RS III alarm. Reconfigured the radio bezel with a carbon fiber MDM-100 and relocated the turbo timer and boost controller. Repaired lost connection to speed sensor. Replaced the complete emergency brake system due to nonfunctioning. There's a few more things but I can't recall off the top of my head. After finishing the complete emergency brake system install from the handle back. Fun! More before interior. All this crap is GONE! New wire. The box is now mounted in the glovebox for the NOS control. New CF from Woodtrim. New cluster before a little more redesign and install of the gauge face overlays. I stuck with the 160 face. Thats it for now. I'll post the finished pics this weekend. (Total Mouse Over Hits: a Lot)
Follow Ups	Terminated! - DVDBURN (MD) 21:57:31 07/01/08 Nice work Gary. - brahmabull (CT) 22:00:21 07/01/08 i need some MD friends around here - Alan(NJ/MD) 22:02:02 07/01/08 There are a few 300's around here but there aren't - 300zx2g35 10:11:01 07/02/08 Cool! (n/m) - DVDBURN (MD) 22:08:40 07/01/08 where to? (n/m) - Spee 22:16:55 07/01/08 Looking in the downtown Baltimore area right now. - brahmabull (CT) 22:50:21 07/01/08 Big money! (n/m) - Fuzznutz 06:04:23 07/02/08 no kidding. Does that mean no more late-night CT meets? - ZEngineer 07:53:25 07/02/08 I'm moving at the end of the month. - brahmabull (CT) 10:18:59 07/02/08 will do, Raj. - ZEngineer 10:37:24 07/02/08 good job on getting rid of the rat's nest (n/m) - robo (sebring1970) 22:01:17 07/01/08 Great job!! It makes you feel so much better - Booster (MD) 22:05:41 07/01/08 You know it! (n/m) - DVDBURN (MD) 22:09:23 07/01/08 you do look like the cop guy from terminator (n/m) - pearlyellowtt 22:13:17 07/01/08 My thoughts exactly. It would be kind of handy for working - Jinjiro 08:20:11 07/02/08 thats the point. "terminated" (n/m) - Luthandrian 18:35:42 07/02/08 Nice work! What an improvement. (n/m) - Dustin 22:19:00 07/01/08 dang, did it come from wagz like that? (n/m) - dpjax 22:20:25 07/01/08 Nice work. MZC - Maryland Z Club is very active.. - 91300zxttkid 22:32:12 07/01/08 Solid work. (n/m) - Kenny 22:33:47 07/01/08 very clean (n/m) - Guapo 22:41:19 07/01/08 Excellent. Extra points for carpeting under the carpet. (n/m) - Ted (92TT) 22:44:40 07/01/08 mmmmmm... carpet sandwhich (n/m) - fanta-z 23:03:57 07/01/08 Great work, Gary! I hate that you have never posted nice - TheTwinZ (Peru) 22:48:42 07/01/08 clean! (n/m) - Dallas DamonZ 23:02:02 07/01/08 nice job now paint the jams black :) (n/m) - fst300zx 23:03:08 07/01/08 nice job, it's scary to see hack jobs that some people make - blacktwin 23:05:47 07/01/08 A few more pics. - DVDBURN (MD) 23:21:35 07/01/08 Forgot to mention. - DVDBURN (MD) 23:26:04 07/01/08 Loving the HRE's BTW (n/m) - blacktwin 23:37:46 07/01/08 did you have the overlays made? almost looks like you - fst300zx 08:54:43 07/02/08 I made them myself at home. (n/m) - DVDBURN (MD) 18:55:34 07/02/08 you impressed me with that one sir :) (n/m) - fst300zx 10:18:11 07/03/08 Well (un)done. (n/m) - Bernie (NoVA) 00:16:36 07/02/08 Thanks Bernie! - DVDBURN (MD) 19:04:49 07/02/08 Good luck w. it Gary. (n/m) - Bernie (NoVA) 22:05:22 07/02/08 WOW I must applaud you that take a LOT of patience. (n/m) - Twindragon 00:27:00 07/02/08 Looks good Gary. (n/m) - Fuzznutz 06:05:05 07/02/08 Nice job Gary... (n/m) - Pats300zx 06:30:46 07/02/08 You installed a new RS III? - ZiNnYc 07:38:17 07/02/08 Sorry, meant to say 3.5. (n/m) - DVDBURN (MD) 19:07:17 07/02/08 Terminator DVDBurn(MD) --- nice ! (n/m) - The Devils Z 08:13:28 07/02/08 Wow...That is alot of work.. - eriksu9 08:41:35 07/02/08 Re: Do you ever do any work on the side for Z's? - DVDBURN (MD) 19:09:58 07/02/08 Well done Gary! (n/m) - Barry (NJ) 10:21:17 07/02/08 LoL! Nice job! (n/m) - Spongerider :) 12:06:19 07/02/08 Wow! Got to say thanks to everyone for the nice comments. - DVDBURN (MD) 18:54:05 07/02/08 Can you do something with those oversized fenders? - Dave N 18:59:06 07/02/08 Let me tell you. - DVDBURN (MD) 19:21:44 07/02/08 Break the promise. :-) - Dave N 01:06:39 07/03/08 Email me your address. - Mike(La Canada) 19:21:02 07/02/08 Thanks Mike. (n/m) - DVDBURN (MD) 19:34:37 07/02/08
Post a Followup	You cannot reply to this message because you are not logged in.